Device for Explosion Protection in closed volumes operating at low vacuum pressures based on the liberation the overpressure of explosion to safe area, avoiding that the design resistance of the equipment is exceeded.
|Dimensions||from 250 up to 1220 mm|
|Material||AISI 304 or 316|
|Bursting pressure||20 to 500 mbar|
|Max. Working Pressure||60% Pstat|
|Support vacuum pressure||-100 mbar|
|Max. Working Temperature||up to 350ºC|
|Product||Gas by Group IIA and organic and metallic dust St3|
|ATEX Certification||according to EN14797:2006 y EN14994:2007|
|Reference||External Dimensions (mm)||Internal Dimensions (mm)||Effective Venting Area|
For other sizes and/or working conditions please consult us
Magnetic Break Detector MK50A
ATEX approval Ex II 3D IIIC t125ºC Dc X
Possibility of mounting on different types of cylinders.
Detection range: Reaction sensitivity [mT] 2
Accuracy: Variations Hysteresis [mm] 1
Temperature: -25ºC to 60ºC
Breakage signalling cable type RECS for high temperature VP2759
Working temperature: -60ºC to 300ºC
Peak temperature: 350ºC
Nominal duct diameter: 0,965 mm
Total length: 2m
|Weather insulation for vent panelsProtection against inclement weather.|
Reaction to fire A1: Non-combustible according to Euroclasses (EN 13501-1)
Operating temperature limit 700ºC
Material: Inox + Rock Wool
|High temperature bag (350ºC).Waterproof and breathable.|
Three layers of polypropylene.
Extremely water resistant.
Air and wind tight, high permeability to water vapour.
|Insulation – Rock Wool BlanketReinforced rock wool blanket with galvanized steel mesh on the outside.|
Maximum exposure temperature up to 560ºC. The reaction to fire behaviour and thermal resistance of this product does not change over time or when subjected to the declared maximum temperature.
|Welded (L) or screwed (U)|
AISI 304 and AISI 316
Vertical (Interior Reinforcement) and Horizontal Installation
Note: Mounting flanges only for cirular panels, the rest is mounted on paper.
|Canvas to protect outdoor panelsProtects the panels from adverse weather conditions such as rain or snow.|
Dynamic rubber strip prevents vibration between compact materials.
It acts as an air, water and dust sealing gasket, both for exteriors and interiors.
Resistant to ultraviolet rays and extreme temperatures.
Temperature from -30ºC to 90ºC .
|High Temperature Ceramic Process Seal|
Stability at high temperatures up to 1100ºC
Meets European regulatory requirements.
Excellent wetting resistance of molten aluminum.
Low thermal conductivity.
Easy to wrap, shape or cut.
Loctite SI 5900; Temperature up to 275ºC in continuous.
|Silicone Process Seal|
Temperature from -40ºC to 220ºC
White sponge silicone (15HS)
Excellent temperature resistance.
Good resistance to chemicals.
Great capacity of recovery to the compression
Good flexibility at low temperatures.