Expertos en prevención y protección de explosiones
Adix » Explosion protection » Trapezoidal Vent Panel – [BTP]
BTP vent panels are perfect to special sizes. Vent panels are special designed to protect the equipments from explosions in closed volumes. BTP panels manage the overpressure in case of explosion to a safety area, avoiding hugh damages at the designed resistance of the container.
Technical details
Technical features |
|
---|---|
Type | Flat Trapezoidal |
Dimensions | From 1000 up to 1700 mm |
Material | AISI 304L o 316L |
Efficiency | 100% |
Bursting pressure | 20 a 500 mbarg |
Tolerance | +/-25% |
Máx. Working Pressure | 40% Pstat |
Support vacuum pressure | – 20 mbar |
Max. Working Temperature | hasta 350 ºC |
Product | Gas by Group IIA and organic and metallic dust St3 |
ATEX Certification | According to EN14797:2006 y EN14994:2007 |
Marking | Ex GD |
Dimensions
Reference
|
External Dimensions (mm) |
Internal Dimensions (mm) |
Effective Venting Area |
---|---|---|---|
BTP1400 | 1400x600x367 | 1320x513x293 | 0,532 |
BTP1700 | 1700x600x367 | 1620x513x293 | 0,653 |
For other sizes and/or working conditions please consult us
Accesories
|
---|
Magnetic Break Detector MK50A ATEX approval Ex II 3D IIIC t125ºC Dc X Possibility of mounting on different types of cylinders. Detection range: Reaction sensitivity [mT] 2 Accuracy: Variations Hysteresis [mm] 1 Temperature: -25ºC to 60ºC |
![]() |
Breakage signalling cable type RECS for high temperature VP2759 Working temperature: -60ºC to 300ºC Peak temperature: 350ºC AWG: 20S Nominal duct diameter: 0,965 mm Total length: 2m |
![]() |
Welded (L) or screwed (U)
AISI 304 and AISI 316 Vertical (Interior Reinforcement) and Horizontal Installation Note: Mounting flanges only for cirular panels, the rest is mounted on paper. |
![]() |
EPDM seal
Dynamic rubber strip prevents vibration between compact materials. It acts as an air, water and dust sealing gasket, both for exteriors and interiors. Resistant to ultraviolet rays and extreme temperatures. Temperature from -30ºC to 90ºC . |
![]() |
High Temperature Ceramic Process Seal
Stability at high temperatures up to 1100ºC Meets European regulatory requirements. Excellent wetting resistance of molten aluminum. Low thermal conductivity. Flexibility. Easy to wrap, shape or cut. Loctite SI 5900; Temperature up to 275ºC in continuous. |
![]() |
Silicone Process Seal
Temperature from -40ºC to 220ºC White sponge silicone (15HS) Excellent temperature resistance. Good resistance to chemicals. Great capacity of recovery to the compression Good flexibility at low temperatures. |
Downloads